|
|
"Click
for a larger view" |
1
1/2" or 2" Side Brackets Price: $ 24.00
The pipe brackets available in either 1 1/2" or 2"
sizes.
|
"Click
for a larger view" |
|
"Click
for a larger view" |
1
1/2 Inch Pipe Base Price: $ 28.00
The
Pipe Base should be used where the Lake bottom is soft or muddy.
The base will eliminate a lot of the side to side motion in
the dock. Extend pipe about 1 1/2 feet through the center hole
and lock the set bolt.
|
"Click
for a larger view" |
1
1/2" Pipe Trim Caps Price: $ 6.00
The
Pipe Trim Cap is used for protection from sharp edges on the
pipe as well as adding a more professional look to your dock.
|
"Click
for a larger view" |
2"
Pipe Trim Caps Price: $ 7.00
The
Pipe Trim Cap is used for protection from sharp edges on the
pipe as well as adding a more professional look to your dock.
|
"Click
for a larger view" |
Rubber
Tops Price: $ 5.00
|
"Click
for a larger view" |
4x4
Wood Side Bracket Price:
$ 33.00
The 4"x4"
Wood Side and Corner Brackets are used the same as our Pipe
Side and Corner Brackets, the only difference is using 4x4 wooden
legs rather than galvanized pipe legs.
|
"Click
for a larger view" |
4x4
Wood Corner Brackets
Price: $33.00
The 4x4 Wood Side and Corner Brackets are used
the same as our Pipe Side and Corner Brackets, the only difference
is using 4x4 wooden legs rather than galvanized pipe legs.
|
"Click
for a larger view" |
4"x
4" Wood Base (11" Diameter) Price: $ 26.00
The 4"x4"
Wood Base is usually installed flush with the bottom of the
4"x4" wooden leg.
|
"Click
for a larger view" |
4"x
4" Brace Bracket Price:
$ 15.00
used on a 4"x4"
wooden leg in the same manner as our pipe
|
"Click
for a larger view" |
4"x
4" Trim Cap Price:
$ 9.00
This cap protects
the 4"x4" wooden leg from cracking and is an attractive
addition to your dock or deck.
|
"Click
for a larger view" |
2"x
4" Ladder Mounting Bracket
Price: $ 14.00
Insert 2"x4"
Ladder into both brackets, and drill through.
|
"Click
for a larger view" |
Bench
Bracket Set Price: $100.00
Assemble with
3/8" bolts, nuts and washers(not included)* Two sets required.
|
"Click
for a larger view" |
Floating
Dock Connectors Price:
$ 26.00
These connectors
can be used on any shape or size floating dock. Mounts easily
with four 3/8" bolts and features a 1/2" Center Swivel
Pin. 3"x4"
|
"Click
for a larger view" |
Outside
2"x4" Ladder Steps Price:
$ 21.00
Mark a comfortable
step distance (10 inches) on both 2x4's, as pictured.
|
"Click
for a larger view" |
Zinc
Alloy Cleats - 6
inch Price: $ 10.00
Cast from a very
durable Zinc Alloy, these cleats are used where more strength
is required.
|
"Click
for a larger view" |
Zinc
Alloy Cleats - 8
inch Price: $ 11.00
Cast from a very
durable Zinc Alloy, these cleats are used where more strength
is required.
|
"Click
for a larger view" |
Zinc
Alloy Cleats - 10
inch Price: $ 12.00
Cast from a very
durable Zinc Alloy, these cleats are used where more strength
is required.
|
"Click
for a larger view" |
Zinc
Alloy Cleats - 12
inch Price: $ 15.00
Cast from a very
durable Zinc Alloy, these cleats are used where more strength
is required.
|
"Click
for a larger view" |
Bench
Corner Support Price:
$ 11.50
These brackets
add stability to the bench and have other uses as well. pieces
are sold individually.
|
"Click
for a larger view" |
Dock
Bench Brackets Price:
$ 100.00
Assemble with
3/8" bolts, nuts and washers.*Two sets required
|
"Click
for a larger view" |
Pipe
Auger 1 1/2" Price:
$ 19.00
for use in soft
bottom areas.
|
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
